Part Number: LX-4841
Standard Pack: 1
Description:
1/4"-28 Taper Thread (SAE-LT), Straight (LX-3007, Qty: 40)
1/4"-28 Taper Thread (SAE-LT), 45 degree (LX-3013, Qty: 10)
1/4"-28 Taper Thread (SAE-LT), 90 degree (LX-3019, Qty: 10)
1/8" P.T.F. Special Extra Short, Straight (LX-3101, Qty. 20)
1/8" P.T.F. Special Extra Short, 45 degree (LX-3113, Qty. 10)
1/8" P.T.F. Special Extra Short, 90 degree (LX-3119, Qty. 10)
Large, 4-way Grease Fitting Tool (LX-1428, Qty: 1)
Small, 4-way Grease Fitting Tool (LX-1426, Qty: 1)
Specifications:
-
Fully hardened for extra durability and to protect them from wear due to constant use
-
Ball check in the head prevents dirt and grit from getting into the fitting
-
Heavier wall thickness for extra strength
-
Zinc Plated with Yellow Passivated finish, for maximum protection against corrosion
-
Stress Relieved and Tempered Carbon Steel Spring
-
Every fitting is individually inspected and batch tested to 5,000 PSI
-
Designed to meet the demanding requirements of most Automotive, Agricultural, Industrial, Marine, Truck, Federal, and, Construction Equipment needs
-
Thread rolled taper threads are stronger and durable due to hardening and toughening of threads. This is not achievable in a cut thread process, as the threads become brittle on the periphery
-
Dome type riviting completely covers the spring enabling the spring to be firmly secured in its place
LX-4850 Grease Fittings Display, SAE & Metric
Product Details
Part Number: LX-4850
Standard Pack: 1
Description:
1/4"-28 Taper Thread (SAE-LT), Straight, 0.54"
(10 Pcs./Pack) – 5 EA
1/8" P.T.F. Special Extra Short, Straight, 0.63"
(10 Pcs./Pack) – 5 EA
8 PC. Astmt., (SAE), 1/4"-28 Taper Thread – 5 EA
8 PC. Astmt., (SAE), 1/8" NPT – 5 EA
8 PC. Astmt., (Metric), 6 MM X 1 – 5 EA
8 PC. Astmt., (Metric), 8 MM X 1 – 5 EA
Specifications:
-
Case Hardened Head only for extra durability and to protect them from wear due to constant use
-
Ball check in the head prevents dirt and grit from getting into the fitting
-
Heavier wall thickness for extra strength
-
Zinc Plated with Yellow Passivated finish, for maximum protection against corrosion
-
Stress Relieved and Tempered Carbon Steel Spring
-
Every fitting is individually inspected and Batch Tested to 8,000 PSI for Industrial Grade and to 5,000 PSI for Commercial Grade (After-Market)
-
Designed to meet the demanding requirements of most Automotive, Agricultural, Industrial, Marine, Truck, Federal, and, Construction Equipment needs
-
Unlike other mass-produced fittings which are fully hardened - only the tip is Case Hardened on Lumax® Fittings. This proprietary process safeguards the female threads and protects the entire female part from being damaged.
-
Thread Rolled taper threads