Part Number: LX-4841
Standard Pack: 1
Description:
1/4"-28 Taper Thread (SAE-LT), Straight (LX-3007, Qty: 40)
1/4"-28 Taper Thread (SAE-LT), 45 degree (LX-3013, Qty: 10)
1/4"-28 Taper Thread (SAE-LT), 90 degree (LX-3019, Qty: 10)
1/8" P.T.F. Special Extra Short, Straight (LX-3101, Qty. 20)
1/8" P.T.F. Special Extra Short, 45 degree (LX-3113, Qty. 10)
1/8" P.T.F. Special Extra Short, 90 degree (LX-3119, Qty. 10)
Large, 4-way Grease Fitting Tool (LX-1428, Qty: 1)
Small, 4-way Grease Fitting Tool (LX-1426, Qty: 1)
Specifications:
-
Fully hardened for extra durability and to protect them from wear due to constant use
-
Ball check in the head prevents dirt and grit from getting into the fitting
-
Heavier wall thickness for extra strength
-
Zinc Plated with Yellow Passivated finish, for maximum protection against corrosion
-
Stress Relieved and Tempered Carbon Steel Spring
-
Every fitting is individually inspected and batch tested to 5,000 PSI
-
Designed to meet the demanding requirements of most Automotive, Agricultural, Industrial, Marine, Truck, Federal, and, Construction Equipment needs
-
Thread rolled taper threads are stronger and durable due to hardening and toughening of threads. This is not achievable in a cut thread process, as the threads become brittle on the periphery
-
Dome type riviting completely covers the spring enabling the spring to be firmly secured in its place
LX-1814 Dual Direction, Large
Part Number: LX-1814
Standard Pack: 12
Description:
Dual-Directional Filter Wrench, Large, 3-3/8" to 3-7/8"
(86 to 98 mm) Diameter
Specifications:
-
Universal - Removes by sizing Itself to the Filter
-
Designed to Fit where Standard Wrenches would Not
-
Two thick Jaws Slide together using a Cam-Mechanism to grab Filters
-
Clamping Action fits most Cars and Trucks Filters
-
Use with 3/8” (9.5 mm) Sq. Drive or 7/8” (22 mm) Hex Wrench
-
Zinc-Plated to Resist Rust, Oxidation and Corrosion
-
Caution: Do Not Use with Power Tools
