Part Number: LX-4841
Standard Pack: 1
Description:
1/4"-28 Taper Thread (SAE-LT), Straight (LX-3007, Qty: 40)
1/4"-28 Taper Thread (SAE-LT), 45 degree (LX-3013, Qty: 10)
1/4"-28 Taper Thread (SAE-LT), 90 degree (LX-3019, Qty: 10)
1/8" P.T.F. Special Extra Short, Straight (LX-3101, Qty. 20)
1/8" P.T.F. Special Extra Short, 45 degree (LX-3113, Qty. 10)
1/8" P.T.F. Special Extra Short, 90 degree (LX-3119, Qty. 10)
Large, 4-way Grease Fitting Tool (LX-1428, Qty: 1)
Small, 4-way Grease Fitting Tool (LX-1426, Qty: 1)
Specifications:
-
Fully hardened for extra durability and to protect them from wear due to constant use
-
Ball check in the head prevents dirt and grit from getting into the fitting
-
Heavier wall thickness for extra strength
-
Zinc Plated with Yellow Passivated finish, for maximum protection against corrosion
-
Stress Relieved and Tempered Carbon Steel Spring
-
Every fitting is individually inspected and batch tested to 5,000 PSI
-
Designed to meet the demanding requirements of most Automotive, Agricultural, Industrial, Marine, Truck, Federal, and, Construction Equipment needs
-
Thread rolled taper threads are stronger and durable due to hardening and toughening of threads. This is not achievable in a cut thread process, as the threads become brittle on the periphery
-
Dome type riviting completely covers the spring enabling the spring to be firmly secured in its place
LX-1360 Diaphragm Pump, 12V
Part Number: LX-1360
Standard Pack: 1
Description:
Diaphragm Pump, 12V, for DEF/Urea/AdBlue.
Specifications:
-
Wetted Components: Nylon/Polyamide (NYL); Polypropylene (PP); Thermoplastic Polyurethane (TPU); Nitrile Rubber (Buna-N/NBR); Stainless Steel (SS 304)
-
Voltage: 12VDC
-
Power: 300W
-
Motor Amps: 16A
-
On/Off Switch
-
Flow Rate: 11 GPM (40 L / Min)
-
Continuous Duty Cycle: 30 Minute
-
Max. Suction Lift: 10 ft. (3 m)
-
Max. Total Head: 23 ft. (7 m)
-
Speed: 2850 RPM
-
Self-Priming: Up to 10 ft. (3 m) above liquid level
-
Pressure: 40 PSI (3 bar)
-
Inlet Diameter: 3/4” (19 mm), Pipe Thread
-
Viscosity: Up to 4600 SSU/1000 cPs max.
-
Outlet Diameter: 1” (25 mm), Pipe Thread
-
PH (High): 8 PH
-
Maximum Liquid Temperature: 140°F (60°C)
Warning: Not Suitable for Use With Oil or Petroleum-Based Products such as Kerosene, Diesel, Gasoline, etc.
