Part Number: LX-4841
Standard Pack: 1
Description:
1/4"-28 Taper Thread (SAE-LT), Straight (LX-3007, Qty: 40)
1/4"-28 Taper Thread (SAE-LT), 45 degree (LX-3013, Qty: 10)
1/4"-28 Taper Thread (SAE-LT), 90 degree (LX-3019, Qty: 10)
1/8" P.T.F. Special Extra Short, Straight (LX-3101, Qty. 20)
1/8" P.T.F. Special Extra Short, 45 degree (LX-3113, Qty. 10)
1/8" P.T.F. Special Extra Short, 90 degree (LX-3119, Qty. 10)
Large, 4-way Grease Fitting Tool (LX-1428, Qty: 1)
Small, 4-way Grease Fitting Tool (LX-1426, Qty: 1)
Specifications:
-
Fully hardened for extra durability and to protect them from wear due to constant use
-
Ball check in the head prevents dirt and grit from getting into the fitting
-
Heavier wall thickness for extra strength
-
Zinc Plated with Yellow Passivated finish, for maximum protection against corrosion
-
Stress Relieved and Tempered Carbon Steel Spring
-
Every fitting is individually inspected and batch tested to 5,000 PSI
-
Designed to meet the demanding requirements of most Automotive, Agricultural, Industrial, Marine, Truck, Federal, and, Construction Equipment needs
-
Thread rolled taper threads are stronger and durable due to hardening and toughening of threads. This is not achievable in a cut thread process, as the threads become brittle on the periphery
-
Dome type riviting completely covers the spring enabling the spring to be firmly secured in its place
LX-1337 Plastic Pail Pump with Flex Hose
Part Number: LX-1337
Standard Pack: 6
Description:
Ideal for transferring most Water-based Solutions, Mild Chemicals, Motor Oil, Hydraulic, Transmission Fluid and Lightweight Oils. No more heavy lifting or messy pouring. Cleanup is a snap.
Specifications:
-
Durable Piston-action Pump Delivers 8 Fluid Ounces (240mL) per Stroke
-
Heavy duty 18” (45 cm) PVC Barrel with 2" (50 mm) Drum Adapter
-
Flexible 2 ft. (60 cm) Clear Discharge Hose
-
18” (45 cm) Dip-tube to fit various Small Containers
-
Suction Inlet includes a 1/2” (12 mm) Hose Barb and 3/4” NPT threads
-
Chemical Resistant Viton® Seals
-
Recommended for Chemicals, Water-based Solutions & Lightweight Oils
-
Wetted Materials: Polypropylene (PP); PVC; Viton®; Stainless Steel
Not Recommended for Use With: Corrosive Chemicals, Strong Solvents, or any Fluids with a Viscosity greater than 2000 SSU (similar to SAE 30 Motor Oil).
