Part Number: LX-4841
Standard Pack: 1
Description:
1/4"-28 Taper Thread (SAE-LT), Straight (LX-3007, Qty: 40)
1/4"-28 Taper Thread (SAE-LT), 45 degree (LX-3013, Qty: 10)
1/4"-28 Taper Thread (SAE-LT), 90 degree (LX-3019, Qty: 10)
1/8" P.T.F. Special Extra Short, Straight (LX-3101, Qty. 20)
1/8" P.T.F. Special Extra Short, 45 degree (LX-3113, Qty. 10)
1/8" P.T.F. Special Extra Short, 90 degree (LX-3119, Qty. 10)
Large, 4-way Grease Fitting Tool (LX-1428, Qty: 1)
Small, 4-way Grease Fitting Tool (LX-1426, Qty: 1)
Specifications:
-
Fully hardened for extra durability and to protect them from wear due to constant use
-
Ball check in the head prevents dirt and grit from getting into the fitting
-
Heavier wall thickness for extra strength
-
Zinc Plated with Yellow Passivated finish, for maximum protection against corrosion
-
Stress Relieved and Tempered Carbon Steel Spring
-
Every fitting is individually inspected and batch tested to 5,000 PSI
-
Designed to meet the demanding requirements of most Automotive, Agricultural, Industrial, Marine, Truck, Federal, and, Construction Equipment needs
-
Thread rolled taper threads are stronger and durable due to hardening and toughening of threads. This is not achievable in a cut thread process, as the threads become brittle on the periphery
-
Dome type riviting completely covers the spring enabling the spring to be firmly secured in its place
LX-1203 18" Thermoplastic, 4500 PSI
Part Number: LX-1203
Standard Pack: 10
Description:
Length : 18" (45 cm), 1/8" (3.2 mm) High Quality Hose,
4500 PSI (310 Bar) 1/8" NPT Threads
Specifications:
-
Fully Bonded Construction to Maximize Kink Resistance and Minimize Bend Radius
-
Both ends have Heavy Duty, High Quality 1/8" NPT Male Threads Fittings
-
Bend Radius : Meets or Exceeds SAE 100 R7
-
Working Temperature Range : -40° F ( -40° C) Min. to 212° F (100° C) Max.
-
Nominal I.D. : 1/8" (3.175 mm) Nominal O.D. : 5/16" (8.0 mm)
-
Maximum Working Pressure : 4,500 PSI (310 Bar)
-
Minimum Burst Pressure : 12,000 PSI (828 Bar)
Caution : Not suitable for Power Operated Lube Equipment. For use on Hand Operated Grease Guns only
